24
EnGLIsh
EC‑Declaration of Conformity
Machinery Directive
18V Cordless Impact Wrench
DCF891, DCF892
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D
e
WALT
, Richard‑Klinger‑Straße 11,
65510, Idstein, Germany
29.08.2021
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
18V Cordless Impact Wrench
DCF891, DCF892
D
e
WALT
declares that these products described under
“technical data” are in compliance with:
EN62841‑1:2015, EN62841‑2‑2:2014
These products conform to the following UK Regulations
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended).
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact
D
e
WALT
at the following
address or refer to the back of the manual.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
DCF891
DCF892
Voltage
V
DC
18
18
Type
1
1
Battery type
Li‑Ion
Li‑Ion
Power output
W
760
760
No load speed
min
‑1
0–2000
0–2000
Impact rate
min
‑1
0–3250
0–3250
Max tightening torque
Precision Wrench
™
mode
Low Mode
Medium mode
High mode
Nm
Nm
Nm
Nm
812
136
406
812
812
136
406
812
Max breakaway torque
Nm
1084
1084
Tool holder
1/2" (13 mm)
1/2" (13 mm)
Weight (without battery pack)
kg
1.67
1.67
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑2:
L
PA
(emission sound
pressure level)
dB(A)
91
91
L
WA
(sound power level)
dB(A)
102
102
K (uncertainty for the
given sound level)
dB(A)
3
3
Vibration emission value
a
h
=
m/s
2
10
10
Uncertainty K =
m/s
2
1.7
1.7
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
18V CORDLESS IMPACT WRENCH
DCF891, DCF892
Summary of Contents for DCF891
Page 1: ...DCF891 DCF892 ...
Page 3: ...1 Fig A Fig B 4 6 7 1 3 2 10 5 8 9 4 5 4 5 12 XXXX XX XX 11 ...
Page 4: ...2 13 14 DCF891 DCF892 10 Fig E Fig C Fig D 7 15 ...
Page 143: ......
