Devon BLAZER 9000, Operator'S Manual

Page: 3 / 19

3
WARNINGS:
When using Lifting Arms, Arms must not be rotated beyond the line decal
on the top plate as shown. The Arm Extensions must not be extended
beyond the arm stops as shown.
(A) - CAUTION, WHEN AREM IS EXTENDED BEYOND THIS LINE TOTAL LIFT CAPACITY IS
REDUCED TO 4,600 POUNDS.
(B) - WARNING, NEVER EXTEND ARM BEYHOND THE STOPS.
II. Installation Instructions
1. The maximum pit width for the Blazer 9000 is 43”.
2. The Blazer 9000 may be mounted on several types of surfaces including regular concrete, pre-cast
concrete and other configurations that may utilize metal beams, etc.
3. There should be adequate space on all sides of the lift. Note that the lift and vehicle will move
approximately 14” backward as the lift rises to its full height.
4. The bases must be aligned perfectly and the same distance apart.
5. Shim as required to level both sides of the lift.
6. The Blazer 9000 can be surface mounted or recessed mounted. Optional ramps are required if the
unit is to be surface installed.
7. See layout dimensions later in this manual.