Devolo 200 AVeasy, User Manual

Page: 19 / 33

| Security in the dLAN
19
|
devolo dLAN 200 AVeasy
|
the code without hyphens in the 'Security ID' field and click Add . The device
will be found if the security ID is correct.
When launching the dLAN configuration wizard again after a successful initial
installation – when integrating a new adapter into the network, for example –
the application will remember devices and security IDs entered in previous ses-
sions. It will therefore not be necessary to enter them again. The dLAN config-
uration wizard will display an error message if an adapter entered previously is
not found. In that case, check whether the dLAN device is connected to the
power grid and is available.
Once you have entered the security IDs of your dLAN adapters, your dLAN net-
work is complete. All computers and other network devices connected to the
adapters by cable should now be able to communicate with one another in the
network.
4.3 devolo Informer
devolo Informer can detect all available dLAN adapters in your home network
and display device information in an overview. After installing the devolo soft-
ware, it can be found in the
Start Programs devolo program group.
When the Informer is launched, it initially scans your home network for all avail-
able dLAN devices. This may take a moment. All found adapters are listed with
their names and MAC addresses in the overview window. Their firmware ver-