|
Security in the dLAN
17
|
devolo dLAN 200 AVeasy
|
햴
Excluding a dLAN 200 AVeasy from your network
To exclude a dLAN 200 AVeasy adapter from an existing network, press its
encryption button for
at least ten seconds
. The device will be assigned a
new randomly generated password and will thus no longer be able to access
the network. To integrate the adapter in a different dLAN 200 AVeasy net-
work, follow the steps described under
햲
or
햳
, depending on whether you
are setting up a new network or adding the adapter to an existing one.
4.2
dLAN 200 AV network encryption using the dLAN
configuration wizard
When using dLAN 200 AV adapters (without encryption buttons), data encryp-
tion can only be set up using the dLAN configuration wizard. Start by updating
the firmware (see 3.5.1 'Firmware update') of the dLAN 200 AV adapters. The
firmware update application can be found in the download section of our web-
site at www.devolo.com.
After successfully installing the devolo software, you can launch the dLAN con-
figuration wizard via the
Start
Programs
devolo
program group and the
Device
Start dLAN configuration wizard
of the devolo Informer.
Before beginning with this step, make a note of the security IDs of all existing
dLAN adapters. This unique identifier of each dLAN device is located on the label
of the housing. It consists of 4 x 4 letters separated by dashes (e.g. ANJR-KMOR-
Summary of Contents for 200 AVeasy
Page 1: ...dLAN 200 AVeasy...
