17
To tighten the catch :
. Loosen screw
c
(open-end spanner 10).
. Turn eccentric
d
in order to increase the « d » distance between the eccentric axle and the
camshaft contact point
e
.
. Keep the eccentric in this position and tighten screw
c
.
To slacken the catch :
. Loosen screw
c
(open-end spanner 10).
. Turn eccentric
d
in order to increase the « d » distance between the eccentric axle and the
camshaft contact point
e
.
. Keep the eccentric in this position and tighten screw
c
.
Do the same operation to adjust the locking device of the mobile frontage in appliance C07898.
. Use a Philips screwdriver.
. You should apply the same tightening on both camshafts.
