deville C07708, Instruction Manual

Page: 14 / 64

14
3 - DESCRIPTION AND SIZE
3.1 DESCRIPTION (Fig. 1)
The main elements of the stove are shown below :
(1) Handle
(2) Loading door
(3) Protection shield
(4) Top
(5) Duct
(6) Panel ou decoration
(7) Air inlet damper
A secondary air inlet is integrated in the upper section of the door window to maintain it clean and
ensure improved wood combustion.
The air inlet damper, located in the lower part of the door, allows the burn rate to be adjusted.
Stove net weight : C07750 Stove approx. 95 kg
C07787 Stove approx. 87 kg
C07790 Stove approx. 91 kg
C07708 Stove approx. 87 kg
C07709 Stove approx. 101 kg
C077AA Stove approx. 78 kg
3.2 SIZE (Fig. 2)
Outer dimensions (mm)
Width Height Depth
C07750 830 765 333
C07787 800 832 404
C07790 / C077AA 698 751 354
C07708 738 1077 355
C07709 738 1327 355
3.3 - VENTILATION OF THE AREA IN WHICH THE APPLIANCE IS TO BE INSTALLED
•
The appliance needs air in addition to the air required by the statutory air change rate. This is obligatory when the
dwelling includes mechanical ventilation.
•
The air intake should give directly to the outside or should be located in an area ventilated to the outside ; it
should also be protected by a grille.
•
The air outlet should be as near as possible to the stove. The user should be able to close it off when it comes
out directly into the room. While the appliance is being used, make sure that it is free of any obstructions.
•
The air intake section should be at least equal to one-quarter of the section of the smoke flue with a minimum of :
- 50 cm
2
for use with the door closed only
•
It may be necessary to stop the extractor of the mechanical ventilation so as to avoid smoke coming back into the
room when the door is opened.
4 - STOVE OPERATING CONDITIONS
4.1 FIRST LIGHTING
- Once the chimney is implemented and the stove set, observe the drying time of the materials used for
the construction (2 to 3 weeks).