10
• Exposure of the control unit to any liquid while it is plugged in
could result in a severe electrical hazard.
• The control unit is a precision electronic product. Use care when
handling or transporting it. Dropping or other sudden impacts may
result in damage to the unit.
• Do not open the control unit – Risk of electrical shock.
• Repairs and service are to be conducted by suitably trained
personnel. If the control unit is not functioning properly, or
has been damaged, unplug the unit and take it out of service
immediately.
• Modification of the support surface or control box is not allowed
without the permission of Drive DeVilbiss Healthcare Ltd. – A
hazard could be introduced.
• Occupants and users of this equipment must never smoke in close
proximity to the control unit, mattress, cushion or bedding being
used with it - Risk of fire.
• Control unit shall not be used in the presence of flammable
gasses or used in oxygen rich environments – Risk of explosion /
fire.
• Control unit functions must be locked out when a patient is left
unattended.
• If children, adults who lack capacity or even pets pose a potential
risk of intentional or unintentional tampering with the control unit
its suitability for use is to be considered during the initial patient /
product risk assessment.
• The mattresses and cushions are for single occupancy use.
Additional weight could damage the support surface or affect the
performance of the system.
• Minimise articles (e.g. bedding) between the support surface and
patient, and secure bed sheets loosely so as not to affect mattress
functionality.
• Perform regular patient skin checks – Any tissue deterioration may
require equipment reallocation and/or a re-assessment of the care
being provided.
• External sources of heat and cold, (e.g. sunlight or air conditioning
units) can impact the surface temperature of the support surface
and/or control unit, ensure the system is appropriately positioned
such that surface temperature is not adversely affected.
• Incompatible support platforms (e.g. a bed frame or chair) can
create stability hazards.
• Misused electrical equipment can be hazardous.
Warning
