DEVO-7 Page 74 of 170
Press DN to get to setting status.
5) State setting: See below interface, press R or L to choose from “ Inhibited” or
“ Active”. If no changes, choose Inhibited (the default setting is Inhibited); choose
Active for changing the amount.
Press DN button to get to output setting.
6) output setting: See below interface, press R to decrease the output amount to
minimum -100%; press L to increase the output amount to m100%.
It is possible to reverse mix direction by pressing R or L button to change the plus
or minus sign before amount.
7) Switch: after finishing output setting, press DN button then get to Switch setting
interface and the current switch status will be shown.
Press ENT button to get the switch setting including ALLON, normal mode switch, ST
1 switch, ST 2 switch, D/R switch, HOLD switch and GEAR switch.
