DEVO-7 Page 55 of 170
3.8 GYRO SETTING
Press “ENT” button to enter Main Menu, press UP or DN until “FUNCTION” flash, and
then press “ENT” button to enter function Menu. Press UP or DN until
“SWHMX”becomes flash. Press ENT to get the Mode option interface. Press R or L, to
choose Manual setting or Automatic setting.
1) Manual Setting:
Press R or L to choose Manual setting, Press ENT button to enter SWITC MIX
interface, Press R or L to choose the desired Switch, MIX is the default
switch.
Press DN to enter SWITC POSITION DATA interface, the initial position is 0. Press R
or L to change value. The gyro you use owns two modes of AVCS and NOR, AVCS
will be activated when the amount is above 50.0%. The bigger the amount is, the
bigger the gyro sensor gain becomes. If the value less than 50,it’s NOR mode. The
smaller the amount is, the bigger the gyro sensor gain becomes.
