DEVO-7 Page 162 of 170
Click the “EXT” to exit after finished.
3.18
（
Fail -Safe
）
There are two possibilities for use if the transmission signal is under abnormal
condition. The first one is to lock the last action data received; the second one is to
execute the pre-set data which is pre-set. The default setting is Servo Hold.
Setting method:
press “ENT” key to get the flashing main memu. Press UP and DN keys until
“
FUNCTION
” becomes flashing, then press “ENT” key to Function menu. Press UP or
DN key until “
SAFE
” becomes flashing; Press ENT key, you will find the Fail safe, as
follows: ELEV
、
AILE
、
THRO
、
RUDD
、
GEAR
、
FLAP
、
GYRO
、
. Take the item Elevator
as an example to explain.
Press R or L key to choose Hold or fail safe. If choose hold,
last received lock out of
control action data; If choose fail safe, perform the protection of out of control data set.
The default setting is Servo Hold.
Then press DN to choose SAFE, press DN key enter to the Fail safe setting interface.
