Develop ineo 3300P User Manual Download Page 165

Page: 165 / 242

User's Guide

- 165 -

Load [paper source] with [paper type] [paper size] [orientation]

- On

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try

one or more of the following:

•

Load the tray or feeder with the correct size and type of paper.

•

From the printer control panel, press

to continue printing.

Note:

If the printer finds a tray that has the correct size and type of paper, then it feeds from that tray.

If the printer cannot find a tray that has the correct size and type of paper, then it prints from the

default paper source.

•

From the printer control panel, press

to cancel the print job.

Summary of Contents for ineo 3300P



















































































































































































































































Search results

Summary of Contents for ineo 3300P

Reviews:

Brands by name

Popular brands

Develop ineo 3300P, User Manual

Search results

Summary of Contents for ineo 3300P

Reviews:

Brands by name

Popular brands