Develop ineo 3300P User Manual Download

Page: 164 / 242

User's Guide

- 164 -

Load [paper source] with [paper size] [orientation]

- On

If the printer control panel light sequence matches the light sequence in the preceding illustration, then try

one or more of the following:

•

Load the tray or feeder with the correct size of paper.

•

From the printer control panel, press

to continue printing.

Note:

If the printer finds a tray that has the correct size of paper, then it feeds from that tray. If the

printer cannot find a tray that has the correct size of paper, then it prints from the default paper source.

•

From the printer control panel, press

to cancel the print job.

Summary of Contents for ineo 3300P



















































































































































































































































Search results

Summary of Contents for ineo 3300P

Reviews:

Related manuals for ineo 3300P

Brands by name

Popular brands

Develop ineo 3300P, User Manual

Search results

Summary of Contents for ineo 3300P

Reviews:

Related manuals for ineo 3300P

Brands by name

Popular brands