Develop ineo 160, User Manual

Page: 25 / 78

Installing the printer driver
4
ineo 160 4-3
4 Installing the printer driver
This section describes the procedure for installing the printer driver. The
printer driver can be installed in two ways: by using “Plug and Play” or by us-
ing the “Add Printer Wizard”.
2
Note
If the machine is to be connected to a USB port, install the printer driver
by using Plug and Play.
If the machine is to be connected to a parallel port, install the printer driv-
er by using the Add Printer Wizard.
For network printing with the 160F, use the “Add Printer Wizard” to install the
printer driver. During installation, select “LPT1” as the printer port.
For details on specifying network connection settings, refer to the User’s
Guide for the Network Interface Card.
2
Note
In order to use IPP (network) printing, the IPP printing settings must be
specified when the printer driver is installed. For details on specifying the
IPP printing settings, refer to the manual provided with the network inter-
face card.
Connection
Method Compatible Operating
Systems Printer Driver
Installation Follow this procedure:
USB port con-
nection Windows XP, Windows
Server 2003, Windows 2000,
Windows Me, and Windows
98 SE Install using
Plug and Play. “Installing the TWAIN driv-
er/printer driver using “Plug
and Play”” on page 4-5
Parallel port
connection Windows XP, Windows
Server 2003, Windows 2000,
Windows NT 4.0, Windows
Me, Windows 98 SE, and
Windows 98 Install using the
Add Printer
Wizard. “Installing the printer driver
using the “Add Printer Wiz-
ard”” on page 4-12