Develop D1531iD User Manual Download

Page: 55 / 165

Loading Originals

D1531iD/D1831iD

4-5

Press the front adjustable
Document Guide Plate tightly up
against the front edges of the
originals.

Is the stack of originals neat?

➜

The maximum number of
originals that can be loaded is
50.

➜

Be sure that the top level of the
original stack does not exceed the

marking.

➜

Be sure that the Document Guide Plates touch both the front and
rear edges of the original stack. If they are not pressed snugly
against the original stack, skewed feeding could result.

Press the [Original] key to light the
Mixed Orig. lamp.

Press the [Auto Paper/Auto Size]
key to light the Auto Paper lamp.

Press the [Start] key to start feeding
and copying the originals from the
top page.

Summary of Contents for D1531iD






































































































































































Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands

Develop D1531iD, User Manual

Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands