Develop D1531iD User Manual Download Page 88

Page: 88 / 165

Advanced Copying

6-8

D1531iD/D1831iD

What is shift grouping?

Important:

✔

The copier must be equipped with an Automatic Document Feeder
and a Shifting Unit.

➜

The grouped copy stacks are
stacked in the same direction, but in
a sawtooth manner by shifting the
tray for each stack.

What is crisscross grouping?

Important:

✔

The copier must be equipped with an Automatic Document Feeder,
16MB Memory for Copier or 32MB Memory for Copier and Paper Feed
Cabinet or Multiple Bypass Tray.

➜

The grouped copy stacks are
stacked in a crisscross manner, one
stack lengthwise on top of another
stack crosswise.

✎

Note
To enable crisscross grouping, the copier must be loaded with paper
of the same size and same paper type, but in two different directions.

Summary of Contents for D1531iD






































































































































































Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands

Develop D1531iD, User Manual

Search results

Summary of Contents for D1531iD

Reviews:

Related manuals for D1531iD

Brands by name

Popular brands