Develco ZHOT101 Technical Manual Download Page 20

Page: 20 / 20

About Develco Products A/S

Energy efficiency, Savings & Comfort

Develco Products provides communication systems for AMR, AMI and Smart Metering. Develco

Products presents a complete solution facilitating the remote control of appliances via intelligent

electricity meters or gateways also capable of communicating with other meters.

SmartAMM

SmartAMM is a modular concept securing a flexible and forward-looking Smart House solution.

SmartAMM makes it possible to monitor and control your home’s electrical appliances and energy

consumption via smart meters. SmartAMM combines automated meter reading with home automation,

and includes:

•

AMR (Automated Meter Management) for existing metering solutions

•

AMR for meter manufacturers

•

Communication modules for integration in meters or appliances (ZigBee, Z-Wave, PLC, GPRS,
GSM and others)

•

Data concentrators with back-office communication (GPRS, SMS, Internet, Fiber, PLC)

•

Home Automation

ENEFITS

•

Cheap and reliable metering

•

Reduced energy consumption

•

Optimized energy consumption (peak level out)

•

Avoidance of blackouts

•

Sale of extra services:

Readout of several meters by diverse manufacturers and types (water, heating, gas,
electricity)

Surveillance

Alarms

Selected cases

•

DONG Energy Gas (AMR of gas meters via GPRS data concentrator)

•

Dong Energy Power (control and alarm via SmartRead power meter)

•

EnergiMidt (SmartAMM concept covering metering (water & heating) and energy display via
power meters as well as home automation.
Everything integrated into one module and installed in the Echelon PLC power meter).

Summary of Contents for ZHOT101





















Search results

Summary of Contents for ZHOT101

Reviews:

Related manuals for ZHOT101

Brands by name

Popular brands

Develco ZHOT101, Technical Manual

Search results

Summary of Contents for ZHOT101

Reviews:

Related manuals for ZHOT101

Brands by name

Popular brands