Develco ZHEMI-101, Technical Manual

Page: 12 / 21

External Meter Interface – ZHEMI-101 – Technical manual
Develco Products A/S Olof Palmes Allé 40 http://develcoproducts.com
DK-8200 Aarhus N info@develcoproducts.com
12
4.1.4 Metering cluster - Manufacture Specific Attributes
Develco Manufacture code is 0x1015.
Table 1 : Formatting Attribute Set (Manufacture Specific)
Identifier Name Type Range Access Default Man./Opt.
0x0300 PulseConfiguration Unsigned 16-
bit integer 0x0000 – 0xFFFF Read/
Write 0x03E8 O
0x0301 CurrentSummation Unsigned 48
bit integer 0x000000 -
0xFFFFFFF Write
Only 0x0000 O
0x0302 InterFaceMode Enum16 0x0000 – 0xFFFF Read/
Write 0x0000
4.1.4.1.1 PulseConfiguration
PulseConfiguration represents the number of pulses the meter outputs per unit.
Default value is 1000 imp/kWh, 0x03E8 = 1000 dec.
4.1.4.1.2 CurrentSummation
CurrentSummation represents the present value for current summation delivered send to the display.
The value must be scaled according to divider and multiplier.
MFG attribute id 0x0302 – Interface mode
Attribute value Description
0x0000 Pulse counting on a Electricity meter – Unit KWh
Typically LED or IR probe is used.
0x0001 Pulse counting on a Gas meter – Unit m3
Typically S0 or Pulse probe is used
0x0002 Pulse counting on a Water meter – Unit m3
Typically S0 or Pulse probe is used
0x0100 Kamstrup KMP protocol – IR communication using IR probe
0x0101 Not supported - Linky protocol
0x0102 DLMS-COSEM - IEC62056-21 mod A
IR communication using IR probe.