Develco ZHEMI-101, Technical Manual

Page: 13 / 21

External Meter Interface – ZHEMI-101 – Technical manual
Develco Products A/S Olof Palmes Allé 40 http://develcoproducts.com
DK-8200 Aarhus N info@develcoproducts.com
13
Example: Preset value = 0,570 kWh
Divider = 1000
Multiplier = 1
That give a
CurrentSummation value of 570
It is important that the
PulseConfiguration attribute has been configured correctly before sending the
CurrentSummation setting because PulseConfiguration is used when calculating the total amount of detected
pulses.
4.1.5 Metering cluster for EP 0x40 and 0x41
End point 0x40 and 0x41 is created runtime when the meter is configured to interface mode P1 – “Dutch Smart Meter
Standard” version 4.0. Endpoint 0x40 is mapped to MBus channel 1, and endpoint 0x41 is mapped to MBus channel 2.
ZigBee SE metering cluster, is listed. Refer to the ZigBee specification of the metering cluster.
4.1.5.1 0x00 Reading Information attribute set
Id# Name Type Range SE Req.
Note
0x00 CurrentSummationDelivered Uint48 Type
range
M
Set based on “ 0-n:24.2.1 ”
0x07 ReadingSnapshotTime UTC Type
range O
Set based on timestamp of
“ 0-n:24.2.1 ”
0x14 SupplyStatus Enum8 O
Set based on “ 0-1:24.4.0 ”
'0': SUPPLY_OFF
'1': SUPPLY_ON
'2': SUPPLY_OFF_ARMED
The current standard IR probe supports 300-1200 BAUD.
IR probe supporting 9600 BAUD is available on request.
0x0103 P1 dutch standard – DSMR 2.3 version
0x0104 P1 dutch standard – DSMR 4.0 version