Develco ZHEMI-101 Technical Manual Download Page 7 | Manualshive

Page: 7 / 21

background image

External Meter Interface

–

ZHEMI-101

–

Technical manual

Develco Products A/S

Olof Palmes Allé 40

http://develcoproducts.com

DK-8200 Aarhus N

[email protected]

7

3

Endpoints

The device has two endpoints:

3.1

ZigBee Device Object (ZDO)

•

Application profile Id 0x0000

•

Application device Id 0x0000

•

Supports all mandatory clusters

3.2

Develco Utility

•

Application profile Id 0xC0C9 (Develco Products private profile)

•

Application device Id 0x0001

•

Develco ZigBee Manufacturer code 0x1015

•

Private profile for internal Develco Products use only.

The DevUtil end point support a Develco products specified bootloader.
New firmware can be downloaded to the device using the SmartAMM SamrtAMM client tool.

3.3

Metering Device

–

End Point 0x02, 0x40 and 0x41

•

Application profile Id 0x0104 (Home Automation)

•

Application device Id 0x0007 (Combined Interface)

•

Clusters

o

Clusters supported as server

▪

Basic

▪

Identify

▪

Metering (ZSE specified cluster)

Each attribute is described in ZigBee Smart Energy specification.

End point 0x40 and 0x41 is created runtime when the meter is configured to interface mode P1

–

“Dutch Smart

Meter Standard” version 4.0. Endpoint 0x40 is mapped to MBus channel 1, and endpoint 0x41 is mapped to MBus

channel 2.ZigBee Clusters

«
...
5
6
7
8
9
...
»

Summary of Contents for ZHEMI-101






















Reviews:

No comments

Related manuals for ZHEMI-101

Brand: Vaisala Pages: 2

Brand: OBDPROG Pages: 8

Brand: Teledyne Hastings Instruments Pages: 54

Brand: Environmental Express Pages: 40

Brand: RHS Pages: 8

Brand: Datakom Pages: 2

Brand: SICK Pages: 68

Brand: Keysight Pages: 56

Brand: E Instruments Pages: 2

Brand: LORECa Hearing Instrument Pages: 43

Brand: Cressi Pages: 36

In-Situ Rugged TROLL 100

Brand: Geotech Pages: 6

WaveRunner 8000-R

Brand: Teledyne Lecroy Pages: 20

Brand: Campbell Pages: 20

Brand: AlazarTech Pages: 64

Brand: S2Tech Pages: 58

Digital Sound Level Meter DSM-1

Brand: Nady Audio Pages: 4

Brand: QEED Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands