Develco ZHEMI-101, Technical Manual

Page: 11 / 21

External Meter Interface – ZHEMI-101 – Technical manual
Develco Products A/S Olof Palmes Allé 40 http://develcoproducts.com
DK-8200 Aarhus N info@develcoproducts.com
11
If the Multiplier and Divisor attribute values are zero, just the formatting hints
defined in
SummationFormatting, ConsumptionFormatting , and DemandFormatting attributes are used.
The following set of attributes provides the ratios and formatting hints required to transform the received
summations, consumptions or demands/rates into displayable values. If the Multiplier and Divisor attribute values
are non-zero, they are used in conjunction with the
SummationFormatting, ConsumptionFormatting , and
DemandFormatting attributes.
Id# Name Type Range Man/Opt Note
0x00 UnitofMeasure 8 bit enum 0x00 to 0xFF M MFG attribute id 0x0302 –
Interface mode
(kWh or m3h)
0x01 Multiplier Uint24 0x000000 to
0xFFFFFF
O Fixed to 1
0x02 Divisor Uint24 0x000000 to
0xFFFFFF
O Fixed to 1000
0x03 SummationFormatting 8 bit bitmap 0x00 to 0xFF M
0x04 DemandFormatting 8 bit bitmap 0x00 to 0xFF O
0x06 MeteringDeviceType 8 bit bitmap 0x00 to 0xFF M Depends on Interface
Mode
Above attribute description is to be found in section D.3.2
.2.4 “Formatting” ZigBee Smart Energy Profile
Specification provided by the ZigBee alliance.
4.1.3.5 0x04 Historical attribute set
Id# Name
Type Range
Man/Opt Note
0x00 InstantaneousDemand Int24
-8,388,607
to
8,388,607
O
ZCL configure reporting is
supported
Above attribute description is to be found in section D.3.2.2.5 “Historical Consumption” document “ZigBee Smart
Energy Profile Specification” provided by the ZigBee alliance.