ESP32SR88
User Manual v1.7
USB Configuration Commands
ST Status. Return the system status
Status:
Firmware Version: 1.0
IP: 0.0.0.0 (192.168.0.48)
Subnet: 255.255.255.0
Gateway: 192.168.0.1
Primary DNS: 192.168.0.1
Secondary DNS: 8.8.4.4
SSID: ********
Password: ********
ASCII TCP Port: 17126
RSSI: -62
MQTT Server: 192.168.0.121
MQTT Port: 1883
MQTT ID: ModuleESP1
MQTT User: myUsername
MQTT Password: ********
Relay1 Topic: R1Topic
Relay2 Topic: R2Topic
Relay3 Topic: R3Topic
Relay4 Topic: R4Topic
Relay5 Topic: R5Topic
Relay6 Topic: R6Topic
Relay7 Topic: R7Topic
Relay8 Topic: R8Topic
Input1 Topic: myNew/TopicA
Input2 Topic: myNew/TopicB
Input3 Topic: N3Topic
Input4 Topic: N4Topic
Input5 Topic: N5Topic
Input6 Topic: N6Topic
Input7 Topic: N7Topic
Input8 Topic: N8Topic
When the IP address is set to 0.0.0.0 this means that the IP address is being provided by your
networks DHCP server. In that case the assigned IP address is also provided, as above.
Copyright
© 2021,
Devantech Ltd.
All rights reserved.
4