Customer Documentation DEV 5071
Copyright DEV Systemtechnik GmbH 2007-2017
41
5.5.3
The DEV 5071 MIB Tree
The MIB is stored on the controller of the device and can be downloaded via
the SNMP setup of the Web Interface (please refer to chapter 5.4.5.4) or
directly from the device with a web browser via the link:
http://<IP-of-the-device>/dev-5071.mib
As shown above, the MIB is divided in four branches: .instrument (chapter
5.5.4.1), .application (chapter 5.5.4.2), .surveillance (chapter 5.5.4.3), and
.SNMPv1 TRAPs (chapter 5.5.4.4). In the corresponding sub-chapter, the
content of each branch is shown expanded and each object within a branch
is described.
5.5.4
MIB Objects
In the following, the objects of the MIB tree are described.
The complete object name of an MIB object results out of the concatenation
of the MIB-String (please refer to chapter 5.5.2):
iso.org.dod.internet.private.enterprises.dev-systemtechnik.dev-5071
and of the corresponding MIB object.
E.g., the object
.instrument.controllerMac
has the full textual OID ("
⌡
" and "
⌠
"
are symbolizing that the corresponding two lines are actually not separated):
iso.org.dod.internet.private.enterprise.dev-systemtechnik.dev-5071
⌡
⌠
.instrument.controllerMac
Note:
Some of the objects are set to a factory default value (chapter 4.3.3).
Some of the objects can be modified in Remote Mode only:
-
.application.(…).channelOn (chapter 5.5.4.2.5.2),
-
.application.(…).channelOutVoltageSet (chapter 5.5.4.2.5.6), and
-
.application. (…).channelOutCurrentSet (chapter 5.5.4.2.5.8)
And some objects can be modified in all modes of operation:
- .application.controlMode (chapter 5.5.4.2.1),
- .surveillance.trapEnableMask (chapter 5.5.4.3.1), and
- .surveillance.errorEnableMask (chapter 5.5.4.3.2)
