Deutz EMR 2, System Description, Page: 7 / 60

© 06/02
Page 65
1
2
3
4
5
6
7
8
9
10
11
12
13
EMR 2
Introduction
1 Introduction
This system description provides an overview of the design and operation of the electronic engine governor
(EMR 2) as a control unit when used in engines of the model series 1012/1013/2012/2013/1015
1)
.
In addition, an explanation is given of the functions of the EMR 2 and how problems with the EMR 2 can be
recognized and overcome.
The EMR 2 is a further development of the previously utilized EMR.
Basically, it has the same functionality as the EMR, but is equipped with additional functions and extensi-
ons that are summarized in Chapter 4.2.
Reference is made to Chapter 8 for information regarding replacements,
1) Same system with Bosch EDC-actuator (1015).
General notes
It is our aim to permanently improve and extend the contents of this brochure. For this purpose, the experi-
ences of the circle of users can be particularly helpful.
Should you desire changes, extensions, improvements, etc., we would welcome your input (Engine mainte-
nance technology department, VS-TI). Please make as much use of this as you wish. In this way, you are
assisting in making the next version more up-to-date. We pay close attention to every message and will
prepare a new issue of the brochure at the appropriate time. We thank you in advance for your cooperation.
Your
DEUTZ AG
Maintenance technology engines