Deutz EMR 2, System Description, Page: 15 / 60

© 06/02
Seite 73
1
2
3
4
5
6
7
8
9
10
11
12
13
EMR 2
System Functions
4.2 Function extensions
The EMR 2 has the same functions as the EMR but possesses extended and new functions.
The new functions in detail are:
!
Improved speed control
!
Third performance curve
!
Smoke limitation = function of the charge air temperature
!
Monitoring the charge air temperature, coolant level
!
Altitude-referenced fuel quantity
!
Control of an engine brake
!
Special set point parameter for genset applications
!
Special vehicle speed evaluation to DIN 11786
!
New functions via the diagnostic button:
- fault blink codes
- clearing the fault memory 1
!
2 Independent fault memories (mirroring the first fault memory)
!
Acquisition of a load collective
!
Baud rate alteration for ISO communication possible
!
Possibility of a software update for the operating software via the
ISO interface
!
Newly introduced or changed commands in ISO communication
!
CAN Bus protocol to SAE J1939 has been greatly extended,
but is upwards compatible to the present EMR applications.
Caution!
EMR and EMR 2 are separate systems. An exchange of control units and actuators is not possible (see
Chapter 8).