Fieldbus parameters / Ethernet parameters
Deutschmann Automation GmbH & Co. KG
44
UNIGATE
®
CX V. 1.4
2.10.19
9
Fieldbus parameters / Ethernet parameters
The data of fieldbus A is passed on to fieldbus B depending on the handling of the scripts
Here the following basic requirement have to be considered:
Bus connection
Bus data
Bus baud raten
Bus ID
CANopen Slave,
CANopen Master,
CAN Layer 2
9 pin D-SUB
connector
255 Byte I/O
125 kbit/s up to 1
Mbit/s adjustable via
DIP-switch
Adjustable via DIP-switch
DeviceNet
5 pin screw-pug
connector
255 Byte I/O
125, 250 and
500kbit/s adjustable
via DIP-switch
Adjustable via DIP-switch
EtherCAT
2x RJ45 In and Out
512 Byte I/O
100 Mbit/s full duplex Permanent MAC-address,
is automatically assigned
EtherNet/IP
2x RJ45
1060 Byte I/O
100 Mbit/s full duplex IP-address adjustable via
WINGATE
Fast Ethernet
Modbus TCP
RJ45
1024 Byte I/O
10/100 Mbit/s
IP-address via
WINGATE or Script or
UNIGATE Scan Tool
LONWorks
4 pin screw-plug
connector
62 In and Out SNVTs,
512 Byte I/O
FTT-10A, 78 kBit/s
Permant Neuron ID
MPI
9 pin D-SUB socket
255 Byte I/O
Automatic detection
(9600 bit/s - 12
Mbit/s)
Adjustable via
rotary switch
PROFIBUS
9 pin D-SUB socket
244 Byte I/O
Automatic detection
(9600 bit/s - 12
Mbit/s)
Adjustable via
rotary switch or via
PROFIBUS-Master
PROFINET
2x RJ45
1440 Byte I/O
100 Mbit/s full duplex Adjustable or is assigned by
the Master
Summary of Contents for UNIGATE CX Series
Page 2: ...Manual Art No V3792E...
