DEUTSCHMANN AUTOMATION UNIGATE CX Series, Instruction Manual

Page: 17 / 61

2.10.19 UNIGATE
®
CX V. 1.4 17
Deutschmann Automation GmbH & Co. KG Protocol Configuration
6 Protocol Configuration
The UNIGATE
®
CX is delivered with the script "Universalscript Deutschmann". The delivery state
is with transparent data exchange, so only the fieldbus-specific parameters must be configured.
The fieldbus-specific parameters include, for example, data exchange ( byte), Fieldbus length
byte (Chapter 7.11, The length byte), Swap word (Chapter 7.12, Swap word) and the settings for
the IP address for the fieldbus variants.
The configuration takes place in the data exchange mode with the software WINGATE (Tools ->
"Upload_Config_Debug" or "Download_Config_Debug").
Further configuration options can be found in the following tables.
6.1 Overview of configurable buses
Configuration
Programming (Script)
CANopen (Slave)


CANopen (Master)  
CAN Layer 2
 
DeviceNet  
EtherCAT
 
Ethernet
 
EtherNet/IP
 
LONWorks  
ModbusTCP
 
MPI  
PROFIBUS
 
PROFINET
 