Blitz-DT9 User Manual
- 8 -
shown in the figure.
Digital Trims
Stick trims: four digital trims for stick output.
L/R trims: two digital trims for L/R knob output.
This transmitter is equipped with four stick trims. Each time you press a trim
button, the trim position moves one step. If you press and hold it, the output
will scroll in that direction until the trim button is released or the output
reaches its ends. You can always monitor trim positions by referencing the
LCD screen.
CAUTION:
The trim positions you have set will be stored in memory and
will remain there even the transmitter powered off.
L/R Knob: It is used to adjust the value of L/R Knob curve.
LS/RS Wheel: It is used to adjust the value of LS/RS curve.
Keys
<CLEAR>: press it to return a selected value on screen to the default
setting.
<BACK>: press it to return to the previous menu.
Scroll Wheel: Scroll it to move through the screen content or change
programming values. Press it to make a selection.
LCD: You can get the current status from the main screen, and set the
parameters from the menu.
Simulator/Trainer Connector
When it is used as a simulator connector, connect the transmitter and
computer by simulator dongle and dongle cable, and then you can learn
flying skills on computer. In order to use this function, you need to purchase
a simulator dongle and the matched simulation software.
When it is used as a trainer connector, connect the instructor and student
transmitter with an optional trainer cable, and then a skilled instructor can
teach a student with flying skills.
Audio Jack: insert the earphone for voice broadcast.
Charge Port: charging the transmitter via the matched charge cable.
SD card slot: press the SD card into it.
Main Screen
Turn on the power switch of the transmitter and directly enter the main screen.
