Blitz-DT9 User Manual
- 42 -
ELE
→
AIL
: This parameter is used to set the mixing rate (percentage) from
elevator channel to aileron channel. Values: -100~100. If the value is negative,
it will adjust the aileron operation in the negative direction. If the value is
positive, it will adjust the aileron operation in the positive direction. The default
is
-100
.
AIL
→
ELE
: This parameter is used to set the mixing rate (percentage) from
aileron channel to elevator channel. Values: -100~100. If the value is negative,
it will adjust the elevator operation in the negative direction. If the value is
positive, it will adjust the elevator operation in the positive direction. The
default is
100
.
ELE
→
ELE
: This parameter is used to set the mixing rate (percentage) from
elevator channel to itself. Values: -100~100. If the value is negative, it will
adjust the elevator operation in the negative direction. If the value is positive,
it will adjust the elevator operation in the positive direction. The default is
100
.
CAUTION
: The delta mixing function cannot be utilized when either the V-tail
or Flaperon mixing function are active.
Flaperon Mixing [Flaperon Mix]
Corresponding model type: airplane, 2 ailerons
The two aileron servos are connected to channel 1 (AIL) and channel 6 (AUX1).
Flaperon mixing allows the ailerons to operate in the same direction (as ailerons)
and in opposing directions (as flaps).
Setting Method:
1. In the
Mix Set
setting interface, roll the scroll wheel to select
Flaperon Mix
,
and then press the scroll wheel to enter the setting interface.
CH1
CH6
CH1 (AILE): left aileron
CH6 (AUX1): right aileron