- 13 -
Basic Operation
Adjust the Stick Lever Tension
This allows adjustment of the stick lever tension to meet different operating
habits.
Tools: Phillips screwdriver, ESD wrist strap or ESD gloves.
Conditions: Before operating, please wear an ESD wrist strap or ESD gloves.
Steps:
1. Open the battery cover, and remove the batteries.
2. Remove the six screws on the rear cover with a Phillips screwdriver.
3. Open the rear cover.
CAUTION
: Please gently ease off the transmitter's rear cover, to avoid
breaking the wirings.
Screw for spring adjustment
Screw for spring adjustment
Screw for spring adjustment
Screw for spring adjustment
4. Use a Phillips screwdriver to adjust the spring strength as you prefer by
turning the screw of the stick you want to adjust. Turning the screw clockwise
increases the tension, counter clockwise to loosen.
CAUTION
: To avoid abnormal work, do not loosen the screw too much.
5. Install the rear cover, and then tighten the six screws on the rear cover.
6. Install the batteries and the battery cover.
Turn on/off the Transmitter
Turn on the transmitter:
1. Move the throttle stick to the lowest position before turning on the power
switch.
2. Push the power switch rightward to turn on the transmitter.
