X
Door Must Swing Freely
Door Must Not be Warped
Door Must Not Bind
Door Must Not Sag
Door Skin
Reinforcement
X
X
!!!CHECK BEFORE STARTING!!!
X
Blind Rivet Nut
INSIDE FACE
RHR DOOR
RHR
INSIDE FACE
LHR DOOR
LHR
FLOOR
C
FINISHED
L
NOTE
: LOCAL CODES MAY REQUIRE THROUGH BOLTING. SEX NUTS ARE
NOT
INCLUDED WITH THIS DEVICE. SEX NUTS CAN BE
PURCHASED SEPARATELY.
104884 Page 5
*DOOR
HEIGHT
*OPENING
HEIGHT
Measure per figure below:
*
These dimensions will be needed during rod length adjustment. Measure door before removing.
*TOP GAP 1/8" (Standard)
*BOTTOM GAP (Max 1-1/2")
*THRESHOLD HEIGHT (if used)
*DIMENSION "A"
(40" RECOMMENDED)
Doors and frames with walls having a structural thickness (metal
skin plus reinforcement) to engage less than (3) full screw
threads, are considered unreinforced for hardware.
FLOOR
FINISHED
DEVICE
HORIZONTAL
STEP 1:
DOOR / OPENING MEASUREMENTS
Unreinforced Doors: Use Sex Nuts and Bolts
Unreinforced Frames: Use Blind Rivet Nuts (see sketch).
Fasteners for unreinforced openings are not supplied by Detex.
Reinforced door or
frame engages at
least (3) screw
threads.
Top Gap
Opening Height
Dimension table
Dimension name
Door Height
Dimension "A"
Threshold Height
Dimension value
(fill in)
Bottom Gap
Minimum Stile Width: 2"
