104884 Page 4
Lockwashers
Device Mounting Hardware
1/4-20 x 1-1/2" PPH
P/N: 100954
10-24 x 1/4" PPH
P/N: PP-5304-104
10-32 x 5/16" PFHU
P/N: 101632-2
6-32 x 3/8" PFHU
P/N: 100162-106
1/4 Lockwasher
P/N: PP-5067-25
Tools Required
Hardware Table for BASIC device mounting. Additional hardware is provided per the
device configuration in kit form and is addressed on the appropriate pages as required.
Used to install device centercase to
backplate
Used to install centercase cover to backplate
(Multiple finishes included)
Used to install endcap to endcap bracket.
(Multiple finishes included)
Used to install centerlift mechansim to
backplate
Strike Mounting Hardware
Latch Mounting Hardware
Used to install bottom strike to floor.
(Used with anchors, two styles of anchors included)
Used to install bottom strike to floor
(alternate)
Used to install top strike pocket to header
and strike insert to top strike pocket
10-24 x 5/16" PFH
P/N: 100112-105
#10 x 3/4" PPHS
P/N: PP-5183-66
10-24 x 3/8" PPH
P/N: PP-5304-306
#14 x 1" PPHS
P/N: PP-5183-108
Used to install backplate & endcap bracket to hollow
metal/aluminum doors. Drill Bit - 3/16 pilot hole
ALTERNATE SCREW
Used with sex bolts or lever trim (2" plus door)
Drill Bit - #7 or 13/64"
#10 x 1" PFHU
P/N: 100109
10-32 x 1/2" PFH
P/N: PP-5802-308
10-24 x 1/2" PFHU
P/N: 100112-108
Used to install bracket to bottom assembly
and top latch
Used to install bottom assembly to bottom of door &
top latch to top of door (For NON-FIRE RATED)
Used with sex bolts or lever trim (1-3/4 door).
Drill Bit - #7 or 13/64"
1/4-20 x 1" PPH
P/N: 100980
1/4-20 x 1.60 Sex nut
P/Ns:
105274-9 (Stainless Steel)
105274-2 (Brushed Brass)
105274-25 (Oil Rub Bronze)
Sex nuts, if ordered. Sex nuts are used with screws in device hardware kit.
Used to install backplate and endcap bracket to door
If using sex nuts with TRIM:
Drill 9/32 hole through interior door face.
Drill 1/2 hole through exterior door face.
If using sex nuts without TRIM:
Drill 3/8 hole through exterior door face.
Power Drill
Level
Screw Drivers
Hack Saw (Chopsaw preferred)
Tap Wrench/ Hex Wrench - 5/64
Masonary Bits - 3/16", 5/16" & 1"
Drill Bit Set
Pliers
Safety Glasses
Tape Measure
Hammer
Pencil
Center Punch
10-24 x 5/8" PFHU
P/N: 100112
Hollow Metal / Wood doors: bottom bracket to latch
Hollow Metal doors: Top & bottom latch brackets to
door
#14 x 1/2" PPHS
P/N: PP-5183-104
Used to install backplate & endcap bracket to
wood doors.
