Operation
EN
20 / 28
07/2020
1
Run reverse button
Press this button.
Red and green LEDs are blinking alternatively.
Apply the tool to the fastener and press the trigger.
How to smooth the tool stop
The "Ergostop" function must be disabled for tightening tests or certification on tightening benches.
Ergostop allows a smoother tool stop to reduce the torque reaction on the operator.
On tool delivery, this feature is disabled.
Go to CVI CONFIG to enable the feature.
How to wake up the tool
The tool display switches off automatically after 2 minutes of inactivity.
Press the trigger.
The WI-FI is de-activated after 5 minutes of inactivity.
Refer to "Power saving mode" configurable in CVI CONFIG.
Press the trigger.
The tool powers off after 30 minutes of inactivity.
Long press the reverse button.
Refer to "Power off" configurable on tool display or with CVI CONFIG.
Unplug and plug the battery pack.