Desoutter EABC15-900-eLINK, Product Instructions, Page: 16 / 28

Operation EN
16 / 28 07/2020
Tick
Standalone
.
Click Write to tool .
Click File > Exit to quit.
How to set up parameters
Plug the eDOCK to the tool and connect it to the USB port of the computer where CVI CONFIG is installed.
Launch CVI CONFIG.
Go to the tree view area.
Create or select a "Factory / Assembly Line / Working area".
Right-click the "Working area" and add a product.
Select ExBC Standalone .
Refer to CVI CONFIG Configuration manual available at https://www.desouttertools.com/resource-centre .
Instructions for use
The tool behaviour is the same as an EABA or EPBA tool.
6 Psets are available.
Refer to the Product Instructions of the tool available at https://www.desouttertools.com/resource-centre .
How to change network parameters
Via CVIMONITOR and eDOCK
Refer to chapter How to connect the tool to CVIMONITOR [Page 12] .
Click this icon.
Click this icon to display the current parameters of the tool.
Change the parameters.
Refer to chapters
Default tool Ethernet configuration [Page 11] and WI-FI settings [Page 9] .