EN
Operation
07/2020
13 / 28
Operation
Configuration Instructions
How to configure the tool
P 0
To o l L o c k e d
P 0 0 2
Icons and buttons
The password is enabled.
The password is disabled.
Press the button "Validate/Run reverse".
Press the right button.
Press the left button.
"Validate/Run reverse" button
Right button
Left button
Validate
Save
Quit
Pset
The sound is disabled.
The sound is enabled.
The battery pack is full.
The battery pack is low.
Additional icons and buttons
Results and curves are stored in the memory board.
They are sent to the system regularly.
Blinking
The synchronization between the tool and the system is in progress.
Steady
The tool is connected to the system.
Steady
The tool is not connected to the system.
Check the cable between the system and the access point.
Check the communication settings.