Desoutter 6151659610, Product Instructions

Page: 12 / 24

Operation EN
12 / 24 06/2020
Go to Enable , tick the box to enable this Pset, save and validate.
Starting the tool
Fit the tool with a suitable socket.
Select the appropriate Pset.
Hold the tool by means of the handle and apply to the fastener to be tightened.
WARNING Risk Of Injury
As the reaction force increases in proportion to the tightening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.
►
Make sure that the tool is in perfect working order and the system is programmed correctly.
Press the trigger to start the tool.
Tightening status and LED reporting
Torque control with angle monitoring
1 Max. torque
2 Target torque
3 Min. torque
4 Downshift torque
5 Pset start torque
6 Angle start
7 Min. angle
8 Max. angle
Examples:
- Both torque and angle within tolerances will lead to a green LED reporting.
- Torque within tolerances and angle below tolerances will lead to red + yellow status (red LED).
For tools running in severe applications, it may happen that reports are null when the battery is low.