GENERAL DESCRIPTION
DESMI Pumping Technology A/S
Tagholm 1
9400 Nørresundby
– Denmark
Tlf. nr.: +45 96 32 81 11
Fax +45 98 17 54 99
E-mail: [email protected]m
6
to the center line of the shaft. Pumps delivered by us connected with prime movers are CE-marked
and comply with the above requirements.
1.1. General
This manual contains general installation, operation and maintenance instructions that must be
observed to ensure safe pump operation and prevent personal injury and damage to property.
The safety information in all sections of this manual must be complied with. This manual must be
read and completely understood by the specialist personnel /operators responsible, prior to
installation and commissioning.
The content of this manual must be available to the specialist personnel at the site at all times.
Information attached directly to the pump must always be complied with and be kept in a perfectly
legible condition at all times. This applies to, for example:
• Arrow indicating the direction of rotation
• Marking for connections
• Name plate
The operator is responsible for ensuring compliance with all local regulations not taken into
account in this manual.
1.2. Personnel qualification and training
All personnel involved must be fully qualified to transport, install, operate, maintain and inspect the
machinery this manual refers to. The responsibilities, competence and supervision of all personnel
involved in transport, installation, operation, maintenance and inspection must be clearly defined
by the operator.
Deficits in knowledge must be rectified by means of training and instruction provided by sufficiently
trained specialist personnel. If required, the operator can commission the manufacturer / supplier
to train the personnel. Training on the pump (set) must always be supervised by technical
specialist personnel.
Summary of Contents for NSL 100-215
Page 2: ......
