This Manual is applicable to the De Sisti F10 Vari-White
Revised on July 2018
ILT ITALY srl
Via Cancelliera, 10/a
00041 Albano Laziale (Rome) Italy
tel. +39 06-902901 fax +39 06-90231051
www.desisti.it
4.
CHARACTERISTICS AND PERFORMANCE DATA
DESCRIPTION
VALUE
DESCRIPTION
VALUE
LED Power
200 W
Protection Type
IP22
Power Consumption
220 W @ 230V (50-60 Hz)
Max Housing temperature
70° C
230 W @120V (50-60 Hz)
DMX Data Link
USITT DMX512-A
This product uses a 5-pin XLR for DMX
input and output. Use a shielded data
cables. Do not overload the daisy chain.
Up to a maximum of 32 devices can be
used on a single DMX chain.
Weight of Fixture
M.O.
P.O.
13,5 kg.
14,8 kg.
DMX Channels
Total 4 DMX Channels:
Dimmer / Light Intensity 16 BITù
Base : Dimmer Gross
Base +1: Dimmer Fine
Base +2: CCT Control
Base +3: CCT Control Mode
Weight of barndoor
4 leaf
8 leaf
1,4 kg.
1,65 kg
Protection class
Class 1– ground connection required
Size of scrims & color frame
Seat Diameter
Acc.ies Diameter
306 mm.
305 mm ( 12’’ )
Lens diameter
250 mm.
Size of barndoor ring
Seat Diameter Ring Diameter
314 mm.
313 mm.
Specifications subject to change without notice.
5.
SAFETY INSTRUCTIONS
Professional use: This luminaire has been designed for professional use and must be operated by qualified personnel only. Not for residential use.
Grounding:
WARNING: THIS LUMINAIRE MUST BE GROUNDED
Electrical connections: IMPORTANT The cores in this mains lead are colored in accordance with the following code:
Europe
America
Ground
Green & yellow
Green or green & yellow
Neutral
Blue
White
Live
Brown
Black
In case the colors of the cores do not correspond to the colors of the connection points on your plug, please proceed as follows:
- the green or green and yellow core must be connected to the connection point marked with the letter E or with the symbol
or colored in
green or in green - yellow;
- the blue (or white) core must be connected to the connection point marked with the letter N or colored in black;
- the brown (or black) core must be connected to the connection point marked with the letter L or colored in red.
WARNING:
Disconnect Power CORDS before
any maintenance work or opening the FUSE HOLDER.
RISK OF SERIOUS INJURY.
