background image

Scope of delivery

3

 

5

 

 

6

6

A

®

®

®

®

17

18

5

1

2

3

4

6

7

8

9

10

11

12

16

14

13

15

SOLAR-POWERED 

SPOTLIGHT

Contents

YEAR

WARRANTY

3

AFTER SALES SUPPORT

MODEL:   

872-S-S, 872-S-G, 872-S-W

03/2021

GB

803287

[email protected]

01909 517672

Great care has gone into the manufacture of this product and it should 

therefore provide you with years of good service when used properly. In 

the event of product failure within its intended use over the course of the 

first 3 years after date of purchase, we will remedy the problem as quickly 

as possible once it has been brought to our attention. In the unlikely event 

of such an occurrence, or if you require any information about the product, 

please contact us via our helpline support services, details of which are to 

be found both in this manual and on the product itself.

IE

GB

PRODUCED IN CHINA FOR:

ALDI STORES LTD. PO BOX 26, ATHERSTONE

WARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.

PO BOX 726, NAAS, CO. KILDARE.

Visit us at www.aldi.com

012 475 437

IE

Scope of delivery

User Manual

General information ................................................................. 7

Reading and storing the user manual .......................................7

Proper use .......................................................................................7

Explanation of symbols ............................................................... 8

Safety .........................................................................................9

Explanation of notes .................................................................... 9

General safety notes ...................................................................10

First use  ................................................................................... 15

Checking the product and scope of delivery  .........................15

Charging the rechargeable batteries for the first time ........16

Selecting the installation location ............................................ 17

Assembly ................................................................................. 18

Mounting the spot light ..............................................................19

Mounting the solar panel ...........................................................19

Operation ................................................................................20

Configuring the sensor area ..................................................... 20

Setting the lighting duration .................................................... 21

Setting the sensitivity ................................................................. 21

Adjusting the spotlight heads ...................................................22

Aligning the solar panel .............................................................22

Switching the product on and off .......................................... 22
Troubleshooting ..................................................................... 23
Cleaning ................................................................................... 26
Storage .................................................................................... 27
Technical data ......................................................................... 27
Declaration of conformity ......................................................28
Disposal ...................................................................................29

Disposing of the packaging ...................................................... 29

Disposing of the product ........................................................... 29

6-872-IM-Cover_Außenstrahler-Solar_WuK2020-1-PRINT.indd   1-5

15.09.20   10:36

Summary of Contents for LIGHTWAY 872-S-G



























Reviews: