ALDI LIGHTWAY 872-S-G User Manual Download

Page: 19 / 26

Troubleshooting

The spotlight switches on at full luminosity

once the motion sensor is activated.

Afterwards, the spotlight decreases in

luminosity (night light function) and continues

to illuminate until the motion sensor is

reactivated.

Troubleshooting

Fault

Possible cause

Solution

The product

does not

switch on

despite

movement

in the sensor

area.

The rechargeable

batteries are

discharged.

Remove any dust, dirt

or snow from the solar

panel

and re-

position it if necessary.

The rechargeable

batteries are faulty.

Contact the After Sales

Support.

The lighting in the

immediate vicinity

is too bright.

Re-configure the

LUX controller

find a more suitable

installation location.

The sensor area

is not correctly

configured.

To correctly set up the

sensor area, turn the

motion sensor housing

The product is

defective.

Have the product

repaired by a

professional.

Summary of Contents for LIGHTWAY 872-S-G



























Search results

Summary of Contents for LIGHTWAY 872-S-G

Reviews:

Related manuals for LIGHTWAY 872-S-G

Brands by name

Popular brands

ALDI LIGHTWAY 872-S-G, User Manual

Search results

Summary of Contents for LIGHTWAY 872-S-G

Reviews:

Related manuals for LIGHTWAY 872-S-G

Brands by name

Popular brands