manualshive.com logo in svg

Design Aeris, Reference Manual

Share
Download
Design Aeris Reference Manual Download Page 37

37

Partial Pressure

 - The proportion of the total pressure contributed by a single gas in a mixture of gases.

PO2

 - Partial pressure of oxygen.  The proportion of total pressure of a gas mixture contributed by oxygen.

Pre Dive Planning Sequence

™

 (PDPS) - A display of available dive times at 10 FT (3 M) intervals from 30 up to 190 

FT (9 up to 57 M) used when dive planning.

Repetitive Dive

 - Any dive that takes place within 12 hours of a previous dive.

Safety Stop

 - A depth at which a diver may choose, but is not required, to pause during ascent to allow absorbed ni-

trogen to escape naturally from the tissues.

Smart Glo

® - An AERIS name for an instrument backlight feature sensitive to light intensity.

Square Wave Dive

 - A type of dive profile where the entire dive is spent at one depth between descent and ascent.

Tissue (or Tissue Compartment) 

- See Compartment.

Transducer 

- An electro-mechanical device in a dive computer that acts as a depth or pressure sensor.

Transition Period

 - The first 10 minutes of surface time after ascending to 2 FT (0.6 M) from a dive.

Variable Ascent Rate Indicator

™

 - A graphic display that represents ascent rate as a bar graph (part of the Graphic 

Diver Interface).

VARI

 - An AERIS abbreviation for Variable Ascent Rate Indicator.

GLOSSARY

 (continued) -

Summary of Contents for Aeris









































Reviews:

No comments

Brands by name

Popular brands

Load more brands