manualshive.com logo in svg

Design Aeris, Reference Manual

Share
Download
Design Aeris Reference Manual Download Page 14

14

WARNINGS and SAFETY RECOMMENDATIONS relating to DIVE PLANNING 

•  The Pre Dive Planning Sequence provides predicted times for subsequent 

dives.  You may actually have less time available than indicated because of 

breathing air quantity and consumption, or oxygen accumulation.

•  AERIS strongly recommends that you review the PDPS prior to every dive to 

help you Plan your dive as required to avoid exceeding no decompression 

or oxygen exposure limits.  This is especially important for repetitive dives, 

when the PDPS will indicate for you the adjusted no decompression dive 

times that are available to you on your next dive, based on any residual 

nitrogen or oxygen accumulation (whichever is in control) following your last 

dive and surface interval.  

•  To reduce your risk of exposure to decompression sickness, oxygen toxicity, 

and the effects of excessive ascent rates, you should  keep each of the bar 

graphs (if available) in normal zones throughout your dives.

•  Never share or exchange a dive computer with another diver, or use another 

dive computer for a repetitive dive.

•  It is extremely important that you read and understand the Operating Manual 

completely before attempting to dive using your AERIS dive computer.

Summary of Contents for Aeris









































Reviews:

No comments

Brands by name

Popular brands

Load more brands