Design Aeris, Reference Manual

Page: 20 / 40

20
Upon ascent to within 5 FT (1.5 M) deeper than the Stop Depth, on a No Deco dive in
which Depth exceeded 30 FT (9 M), Stop at the Depth set will be displayed with Stop Time
counting down to 0:00 (min:sec).
If you descend 10 FT (3 M) deeper than the Stop Depth during the countdown, or the
countdown reaches 0:00, the No Deco Main screen will replace the Stop screen which
will reappear upon ascent to within 5 FT (1.5 M) deeper than the Safety Stop Depth.
If you enter Deco during the dive, complete the Deco obligation, then descend below 30
FT (9 M); the Stop screen will appear again upon ascent to within 5 FT (1.5 M) deeper
than the Stop Depth.
If you ascend 2 FT (0.6 M) shallower than the Stop Depth prior to completing it, the Stop
will be canceled for the remainder of that dive.
There is no Penalty if you surface prior to completing the Safety Stop.
VARI (Variable Ascent Rate Indicator™)
Most all AERIS dive computers are configured with a VARI (bar graph) that shows how fast
you are ascending. When you exceed the maximum ascent rate allowed for the depth
you are at, the VARI will enter the Alarm (Too Fast) zone and you will be alerted by all seg-
ments flashing which will stop when your ascent rate is slowed.
(continued on page 21)