Design Aeris, Reference Manual

Page: 28 / 40

28
If inadvertently left in the direct sunlight for a long period, the LCD (display) may become
totally black. If this occurs, immediately immerse the unit in water. The display should
recover its normal appearance after a few minutes. Damage from excess heat, or cold, is
not covered by the product's limited warranty.
Cleaning
Soak and rinse your dive computer in fresh water at the end of each day of diving. Also,
check the low pressure sensor guard cap, PC Interface data port, and buttons to ensure
they are free of any debris or obstructions.
Use lukewarm fresh water, or a 50% solution of white vinegar and fresh water, to soak
and dissolve any salt crystals. After removal from the bath, place the unit under gently run-
ning fresh water and towel dry before storing. Transport cool, dry, and protected.
Annual Inspections
Your dive computer should be inspected annually by an Authorized AERIS Dealer who will
perform a factory prescribed function check and inspection for damage or wear. To keep
the 2 year limited warranty in effect, this inspection must be completed one year after pur-
chase (+/- 30 days).
AERIS recommends that you continue to have this inspection performed every year to
ensure your dive computer is working properly. The costs of annual inspections are not
covered under the terms of the 2 year limited warranty.
(continued on page 29)