DESi utopicR, User Manual

Page: 68 / 74

8.1.9. ADJUSTING LATCH RETRACTION PERIOD (FOR SOME MODELS ONLY)
According to type of your lock and usage, you would need to adjust the time period which the motorized
cylinder will keep latch of the lock inside when it unlocks the lock. To adjust latch retraction period, follows
the steps below:
- Press 3rd button till “0" flashes on the display.
- Press 2nd button one time. “9" will be flashing on the display.
- Press 3rd button. “O”, ”1", “2" or “3” will be shown on the display.
- Use 1st and 2nd buttons to choose one of following options;
“0” - Short Period (latch will be kept inside the lock around 1 second and then released)
“1” - Middle Period (latch will be kept inside the lock around 3 second and then released)
“2” - Long Period (latch will be kept inside the lock around 6 second and then released)
“3” - Longest Period (latch will be kept inside the lock around 9 second and then released)
- When desired choice is displayed, press to 3rd button.
After first locking or unlocking operation done by master remote controller, selected settings will be
applied to the system. Schematic representation of adjusting latch retraction period to 3 seconds is as
follows:
68
1
2
3
3s