DESi utopicR, User Manual

Page: 73 / 74

73
10. HOW TO RESET MOTORIZED CYLINDER
If you want to change master controller of your motorized cylinder or if you want to delete all controllers enrolled to the
device, you can reset your motorized cylinder as follows:
- Press and hold 2 buttons on the motorized knob. A long warning tone will be heard. Continue to hold the buttons. After a
while, second warning tone will start.
- During second warning tone, release the buttons and plug the provided charger into charging port of motorized cylinder
as soon as possible. Charger should be plugged to electricity as well.
- After a while, double tone and then triple tone will be heard and all the controllers, including master controller, enrolled
to the device will be deleted.
After resetting the motorized cylinder, please check if old master controller of motorized cylinder is deleted or not. If it is
not deleted, repeat the procedure above.
If it is deleted, press and hold 2 buttons on the motoized cylinder till you hear a long warning tone. After that send a
controlling signal via the desired master controller as follows:
- For mobile phone, please check page 7.
- For fingerprint reader, wake the fingerprint reader up and touch the locking button.
- For keypad, what the keypad up and touch the locking button.
- For master remote controller, press and hold button #2 till the motorized cylinder starts to operate.