Features and Components
Resistance Pro Meter
SCS
- 926 JR Industrial Drive, Sanford, NC 27332
East: (919) 718-0000 | West: (909) 627-9634
•
Website:
StaticControl.com
TB-9092
Page 3 of 8 December 2019
©
2019 DESCO INDUSTRIES INC
Employee Owned
A. Test Jacks:
The shielded black test lead
’
s male
SMA connector connects into the meter's female
SMA connector, and the red test lead
’
s banana plug
connects into the meter's banana jack.
B. Exponent LEDs:
These LEDs indicate the
Surface resistance exponent value. They are color
coded for resistance decade quick checks.
Exponent
Color
<3, 3
Yellow
4, 5, 6, 7, 8, 9, 10
Green
11, 12, >12
Red
(i.e. 8 = 10
⁸
ohms or 100,000,000 ohms).
C. OLED Display:
Displays the temperature,
relative humidity, battery life, test voltage and
resistance measurement.
D. Power Switch:
Slide the switch to the left to
power the meter OFF. Slide the switch to the right to
power the meter ON.
E. Black Pushbuttons:
Each black pushbutton
corresponds to the prompts on the bottom-left and
bottom-right of the display. These buttons are used
to access the Settings and Memory Recall menus
and scroll up and down between menu options.
F. Red Pushbutton:
Corresponds to the prompts
located in the bottom-center of the display. This
button is used to perform tests and select menu
options. Press and hold this button when in the
Settings and Memory Recall menus to exit and
return to the home screen.
Figure 4. Resistance Pro Meter Features and
Components
