background image

DESCO WEST 

- 3651 Walnut Avenue, Chino, CA 91710 • (909) 627-8178

DESCO EAST 

- One Colgate Way, Canton, MA 02021-1407 • (781) 821-8370 • Website: 

Desco.com

TB-3069

 Page 3 of 7

© 2016 DESCO INDUSTRIES, INC.

Employee Owned

Features and Components

B

Figure 7.  Combo Tester features and components

A

C

D E

F

G

A.  6-9VDC Power Jack:

 Connect the 

98256

 or 

98257

 

power adapter (sold separately) here to power the 

Combo Tester.

B.  Test Result LEDs:

 Displays the test results.

C.  Foot Plate Jack:

 Connect the banana plug terminal 

of the foot plate cord here and the other end to the 

pedestal (

19282

) or stainless steel foot plate (

19283

98273

).

D.  Rocker Switch:

 Toggle to the left when performing 

a footwear test.  Toggle to the right when performing a 

wrist strap test.

E.  Single-Wire Wrist Strap Jack:

 Insert your 

single-wire wrist cord here to test your wrist strap.

F.  Test Switch:

 Push down and hold your finger here 

to perform a test.

G.  Low Battery LED:

 Illuminates when the battery 

power is low and needs to be replaced.

98254

 STAND AND FOOT PLATE

1  Foot Plate

1 Pedestal

1  Foot Plate Cord, 5 inches

3  Button Head Screws, 1/4-20 x 3/4”

1  Allen Wrench, 5/32”

1  Flat Head Screw, 8-32 x 5/8”

1  Knurled Nut, 8-32

1  Black Cap

1 Poster

Figure 5.  Desco 

98254

 Stand and Foot Plate

98273

 STAINLESS STEEL FOOT PLATE

1  Stainless Steel Foot Plate

1  Foot Plate Cord, 6 feet

Figure 6.  Desco 

98273

 Stainless Steel Foot Plate

Summary of Contents for 19280








Reviews: