![background image](http://html1.mh-extra.com/html/desa/v-dvf36tclp-e/v-dvf36tclp-e_owners-operation-and-installation-manual_2486233017.webp)
www.desatech.com
112108-01C
1
VENTING INSTALLATION
INSTRUCTIONS
Continued
Figure 29 - Vertical Rigid Venting
Configuration With No Horizontal Run
Vertical Venting
V = 40' max.
HIGH ALTITUDE INSTALLATION
Your DESA direct-vent fireplace has been tested
and approved for elevations from 0-2,000 feet and
certified for elevations from 0-5,000 feet.
Fireplaces for High Altitude (models ending in
HA) are for installation above 4,000 feet only.
These fireplaces are equipped with parts specific
for higher altitudes.
IMPORTANT
:
These fire-
places can NOT be converted to propane/LP gas.
When installing a non-high altitude fireplace at an
elevation above 2,000 feet (USA), you may need to
decrease the input rating by changing the existing
burner orifice to a smaller size. Reduce input 4%
for each 1,000 feet above sea level. Check with
your local gas company for proper orifice size
identification.
When installing this fireplace at an elevation
above 4,500 feet (Canada), check with local
authorities.
Consult with your local gas company to help de-
termine the proper orifice size and identification
for your location.
Components and parts must be ordered by part
number through your local dealer or distributor.
IMPORTANT:
For horizontal installations
above 2,000 feet, it is recommened that a 12"
extension pipe be added before starter elbow
(see Figure 30).
PARTS LIST FOR DESA VENTING
KITS AND COMPONENTS
DESA (5"/8") Pipe & Vent Kits
Number
Description
VKR-58 Roof Vent Kit, Galvanized
(Includes: 45° Elbow, "-12"
Adjustable Pipe, Flue Restrictor,
Vertical High Wind Termination,
2' Pipe, 4' Pipe, Wall Firestop,
Storm Collar, Roof Flashing
[0/12 - 6/12], 26 Screws)
VKB-58
Basement Vent Kit, Galvanized
(Includes: 45° Elbow, "-12"
Adjustable Pipe, Wall Firestop,
Horizontal Square Termination,
4' Pipe, 90° Elbow, 20 Screws)
VKS-58
Snorkel Vent Kit, Galvanized
(Includes: 45° Elbow, "-12"
Adjustable Pipe, Wall Firestop,
36" Snorkel Termination, 4' Pipe,
1' Pipe, 90° Elbow, 26 Screws)
VKG-58 Ground Floor Vent Kit, Galvanized
(Includes: 45° Elbow, "-12"
Adjustable Pipe, Wall Firestop,
Horizontal Square Termination,
16 Screws)
P58-48
48" Section Double Wall Pipe,
Galvanized
P58-36
36" Section Double Wall Pipe,
Galvanized
P58-24
24" Section Double Wall Pipe,
Galvanized
P58-12
12" Section Double Wall Pipe,
Galvanized
P58-6
6" Section Double Wall Pipe,
Galvanized
PA58-12 Adjustable "-12" Section Double
Wall Pipe, Galvanized
FPA58-6 6" Dura Vent Collar to FMI Pipe
Adaptor
Figure 30 - Recommended 12" Extension
for High Altitude Installation
45° Starter
Elbow
Note
: Install
restrictor into inner
collar of fireplace
as shown.
45° Starter
Elbow
12"
Extension