background image

NATURAL GAS MODELS (V)KC36NE SERIES

PROPANE/LP GAS MODELS (V)KC36PE SERIES

*Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer.

DIRECT-VENT FIREPLACE

OWNER’S OPERATION AND 
INSTALLATION MANUAL

FOR YOUR SAFETY

WHAT TO DO IF YOU SMELL GAS
•  Do not try to light any appliance.
•  Do not touch any electrical switch
•  Do not use any phone in your building.
•  Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

•  If  you  cannot  reach  your  gas  supplier,  call  the  fire 

department.

WARNING: Improper installation, 
adjustment, alteration, service or 
maintenance can cause injury or 
property  damage.  Refer  to  this 
manual  for  correct  installation 
and  operational  procedures. 
For  assistance  or  additional 
information  consult  a  qualified 
installer, service agency or the 
gas supplier.

This appliance may be installed in an aftermarket*, permanently located, manufactured (mo-

bile) home, where not prohibited by state or local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance 

is not convertible for use with other gases, unless a certified kit is used.

WARNING: If the information in this manual is not fol-
lowed  exactly,  a  fire  or  explosion  may  result  causing 
property damage, personal injury or loss of life.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors 
and liquids in the vicinity of this or any other appliance.

Installation  and  service  must 
be  performed  by  a  qualified 
installer, service agency or the 
gas supplier.

Save this manual for future reference.

For more information, visit www.desatech.com

State of Massachusetts: The installation must be made by a licensed plumber or gas fitter in 
the Commonwealth of Massachusetts.

Summary of Contents for KC36NE Series







































Reviews: