background image

www.desatech.com

117536-01B

2

WARNING:  Improper  installation,  adjustment,  altera-
tion, service or maintenance can cause injury or prop-
erty damage. Refer to this manual for correct installation 
and  operational  procedures.  For  assistance  or  addi-
tional information consult a qualified installer, service 
agency or the gas supplier.

WARNING:  This  appliance  is  for  installation  only  in 
a  solid-fuel  burning  masonry  or  UL127  factory-built 
fireplace, constructed of noncombustible material and 
connected to a working flue. (See page 5 for minimum 
flue opening.

WARNING: This is a decorative gas appliance. It uses 
air (oxygen) from the room in which it is installed. Provi-
sions for adequate combustion and ventilation air must 
be provided. Refer to the 

National Fuel Gas Codes, ANSI 

Z233.1/NFPA  54,  Section  5.3, Air  for  Combustion  and 
Ventilation.

This appliance may be installed in an aftermarket,* per-
manently located, manufactured (mobile) home, where 
not prohibited by local codes.
This appliance is only for use with the type of gas indi-
cated on the rating plate.  

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

State of Massachusetts: The installation must be made 
by a licensed plumber or gas fitter in the Commonwealth 
of Massachusetts.

TABLE OF CONTENTS

Safety Information ............................................... 3
Product Identification ........................................... 4
Local Codes ........................................................ 4
Unpacking ........................................................... 4
Installation ........................................................... 5
Operating Appliance ............................................ 9
Cleaning and Maintenance ................................ 10

Service Hints ..................................................... 10
Technical Service .............................................. 10
Replacement Parts ............................................ 10
Troubleshooting ..................................................11
Accessories ....................................................... 13
Illustrated Parts Breakdown and Parts List ....... 14
Warranty Information ...........................Back Cover

Summary of Contents for Comfort Glow SYCAMORE SPLIT SMS18

















Reviews: